BOCK F2
F
German semi-hermetic compressors for transport refrigeration, heat pumps, and bus air-conditioning.
Specifications
- Compression technology: Reciprocating
- Configuration: Single
- Enclosure / drive: Open-Drive
- Variable speed: Fixed-Speed
- Hazardous-area certification: No
- Product category: compressor
Qualified refrigerants & capacity
Calculated cooling capacity (kW). The evaporating / condensing temperature each column was evaluated at is listed per refrigerant, because the grid differs by refrigerant.
| Refrigerant | ULT | LT | MT | HT | Conditions |
|---|---|---|---|---|---|
| R134a | — | — | 2.92 | 3.7 | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
| R22 | — | 1.47 | 5.11 | 6.25 | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
| R404A | — | 1.34 | 5.03 | 6.18 | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
| R407C | — | — | 4.28 | 5.37 | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
Related BOCK models
- EX-HG12P/110-4
- EX-HG12P/110-4 HC
- EX-HG12P/110-4 S
- EX-HG12P/110-4 S HC
- EX-HG12P/60-4 S
- EX-HG12P/60-4 S HC
- EX-HG12P/75-4
- EX-HG12P/75-4 HC
Frequently asked questions
What refrigerants does the BOCK F2 support?
The BOCK F2 is qualified for R134a, R22, R404A, R407C. The table above lists capacity at ultra-low, low, medium and high temperature duty for each refrigerant, with the evaporating and condensing temperature each value was calculated at. Those conditions differ by refrigerant, so read them per row.
What is the cooling capacity of the BOCK F2?
Running on R22, the BOCK F2 delivers 1.47 kW at LT (-35 / 45 °C), 5.11 kW at MT (-10 / 45 °C), 6.25 kW at HT (-5 / 45 °C). These are calculated cooling capacities at the rating basis the manufacturer declares with its data, not measured values. Use the Benchmark tool to evaluate capacity at your exact SST/SDT and superheat conditions.
What type of compressor is the BOCK F2?
DigiEntropy classifies the BOCK F2 as F. Browse the BOCK catalog to compare nearby models from the same brand.
Can the BOCK F2 be retrofit to a lower-GWP refrigerant under EU F-Gas Regulation 2024/573?
Open the F-Gas Retrofit tool with this model pre-selected to see drop-in alternatives ranked by capacity match, COP, GWP, PFAS impact, and 2026/2030/2035 phase-out timeline.
Where does the BOCK F2 performance data come from?
From BOCK's own published performance data, evaluated at the suction and liquid conditions the manufacturer declares with it. Which rating standard the manufacturer certifies to (EN 12900 or AHRI 540) is not stated on this page; check the manufacturer's datasheet. Fit your own data in the Polynomial Fitter tool.