Frick RWF II 134 ECON
Screw (economized)
Specifications
- Compression technology: Screw
- Configuration: Single
- Enclosure / drive: Open-Drive
- Variable speed: Not Stated
- Hazardous-area certification: Not Stated
- Product category: compressor
Qualified refrigerants & capacity
Calculated cooling capacity (kW). The evaporating / condensing temperature each column was evaluated at is listed per refrigerant, because the grid differs by refrigerant.
| Refrigerant | ULT | LT | MT | HT | Conditions |
|---|---|---|---|---|---|
| R507A | — | 364.97 | 864.47 | 1.0 | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
| R717 | — | 279.45 | 789.69 | 946.07 | ULT -45 / 35 °C; LT -35 / 35 °C; MT -10 / 45 °C; HT -5 / 45 °C |
Related Frick models
- RWB II 100
- RWB II 100 BOOSTER
- RWB II 1080
- RWB II 134
- RWB II 134 BOOSTER
- RWB II 177
- RWB II 177 BOOSTER
- RWB II 222
Frequently asked questions
What refrigerants does the Frick RWF II 134 ECON support?
The Frick RWF II 134 ECON is qualified for R507A, R717. The table above lists capacity at ultra-low, low, medium and high temperature duty for each refrigerant, with the evaporating and condensing temperature each value was calculated at. Those conditions differ by refrigerant, so read them per row.
What is the cooling capacity of the Frick RWF II 134 ECON?
Running on R717, the Frick RWF II 134 ECON delivers 279.45 kW at LT (-35 / 35 °C), 789.69 kW at MT (-10 / 45 °C), 946.07 kW at HT (-5 / 45 °C). These are calculated cooling capacities at the rating basis the manufacturer declares with its data, not measured values. Use the Benchmark tool to evaluate capacity at your exact SST/SDT and superheat conditions.
What type of compressor is the Frick RWF II 134 ECON?
DigiEntropy classifies the Frick RWF II 134 ECON as Screw (economized). Browse the Frick catalog to compare nearby models from the same brand.
Can the Frick RWF II 134 ECON be retrofit to a lower-GWP refrigerant under EU F-Gas Regulation 2024/573?
Open the F-Gas Retrofit tool with this model pre-selected to see drop-in alternatives ranked by capacity match, COP, GWP, PFAS impact, and 2026/2030/2035 phase-out timeline.
Where does the Frick RWF II 134 ECON performance data come from?
From Frick's own published performance data, evaluated at the suction and liquid conditions the manufacturer declares with it. Which rating standard the manufacturer certifies to (EN 12900 or AHRI 540) is not stated on this page; check the manufacturer's datasheet. Fit your own data in the Polynomial Fitter tool.