Hanbell RC2-100G
RC2-G
Taiwan-built twin-screw and scroll compressors — proven in chillers and heat pumps worldwide.
Specifications
- Compression technology: Screw
- Configuration: Single
- Enclosure / drive: Semi-Hermetic
- Variable speed: Not Stated
- Hazardous-area certification: Not Stated
- Product category: compressor
Qualified refrigerants & capacity
Calculated cooling capacity (kW). The evaporating / condensing temperature each column was evaluated at is listed per refrigerant, because the grid differs by refrigerant.
| Refrigerant | ULT | LT | MT | HT | Conditions |
|---|---|---|---|---|---|
| R1234ze(E) | — | — | — | — | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
| R134a | — | — | — | — | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
| R513A | — | — | — | — | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
| R515B | — | — | — | — | ULT -60 / 45 °C; LT -35 / 45 °C; MT -10 / 45 °C; HT -5 / 45 °C |
Related Hanbell models
Frequently asked questions
What refrigerants does the Hanbell RC2-100G support?
The Hanbell RC2-100G is qualified for R1234ze(E), R134a, R513A, R515B. The table above lists capacity at ultra-low, low, medium and high temperature duty for each refrigerant, with the evaporating and condensing temperature each value was calculated at. Those conditions differ by refrigerant, so read them per row.
What type of compressor is the Hanbell RC2-100G?
DigiEntropy classifies the Hanbell RC2-100G as RC2-G. Browse the Hanbell catalog to compare nearby models from the same brand.
Can the Hanbell RC2-100G be retrofit to a lower-GWP refrigerant under EU F-Gas Regulation 2024/573?
Open the F-Gas Retrofit tool with this model pre-selected to see drop-in alternatives ranked by capacity match, COP, GWP, PFAS impact, and 2026/2030/2035 phase-out timeline.
Where does the Hanbell RC2-100G performance data come from?
From Hanbell's own published performance data, evaluated at the suction and liquid conditions the manufacturer declares with it. Which rating standard the manufacturer certifies to (EN 12900 or AHRI 540) is not stated on this page; check the manufacturer's datasheet. Fit your own data in the Polynomial Fitter tool.