Hanbell RH-150
RH
Taiwan-built twin-screw and scroll compressors — proven in chillers and heat pumps worldwide.
Specifications
- Compression technology: Screw
- Configuration: Single
- Enclosure / drive: Semi-Hermetic
- Variable speed: Not Stated
- Hazardous-area certification: Not Stated
- Product category: compressor
Qualified refrigerants & capacity
Calculated cooling capacity (kW). The evaporating / condensing temperature each column was evaluated at is listed per refrigerant, because the grid differs by refrigerant.
| Refrigerant | ULT | LT | MT | HT | Conditions |
|---|---|---|---|---|---|
| R744 | 258.59 | 357.88 | — | — | ULT -40 / -10 °C; LT -30 / -5 °C; MT -5 / 25 °C; HT -5 °C evaporating, transcritical gas cooler |
Related Hanbell models
Frequently asked questions
What refrigerants does the Hanbell RH-150 support?
The Hanbell RH-150 is qualified for R744. The table above lists capacity at ultra-low, low, medium and high temperature duty for each refrigerant, with the evaporating and condensing temperature each value was calculated at. Those conditions differ by refrigerant, so read them per row.
What is the cooling capacity of the Hanbell RH-150?
Running on R744, the Hanbell RH-150 delivers 258.59 kW at ULT (-40 / -10 °C), 357.88 kW at LT (-30 / -5 °C). These are calculated cooling capacities at the rating basis the manufacturer declares with its data, not measured values. Use the Benchmark tool to evaluate capacity at your exact SST/SDT and superheat conditions.
What type of compressor is the Hanbell RH-150?
DigiEntropy classifies the Hanbell RH-150 as RH. Browse the Hanbell catalog to compare nearby models from the same brand.
Can the Hanbell RH-150 be retrofit to a lower-GWP refrigerant under EU F-Gas Regulation 2024/573?
Open the F-Gas Retrofit tool with this model pre-selected to see drop-in alternatives ranked by capacity match, COP, GWP, PFAS impact, and 2026/2030/2035 phase-out timeline.
Where does the Hanbell RH-150 performance data come from?
From Hanbell's own published performance data, evaluated at the suction and liquid conditions the manufacturer declares with it. Which rating standard the manufacturer certifies to (EN 12900 or AHRI 540) is not stated on this page; check the manufacturer's datasheet. Fit your own data in the Polynomial Fitter tool.