MYCOM i125L-H
Screw (single-stage booster)
Specifications
- Compression technology: Screw
- Configuration: Single
- Enclosure / drive: Open-Drive
- Variable speed: Not Stated
- Hazardous-area certification: Not Stated
- Product category: compressor
Qualified refrigerants & capacity
Capacity (kW) evaluated at standard conditions: ULT (-60/45 °C), LT (-35/45 °C), MT (-10/45 °C), HT (-5/45 °C).
| Refrigerant | ULT | LT | MT | HT |
|---|---|---|---|---|
| R717 | 0.04 | 0.04 | 0.16 | 0.16 |
Related MYCOM models
Frequently asked questions
What refrigerants does the MYCOM i125L-H support?
The MYCOM i125L-H is qualified for R717. Capacity values at standard ULT (-60/45 °C), LT (-35/45 °C), MT (-10/45 °C) and HT (-5/45 °C) conditions are listed in the table above for each refrigerant.
What is the cooling capacity of the MYCOM i125L-H?
Running on R717, the MYCOM i125L-H delivers 0.04 kW at ULT, 0.04 kW at LT, 0.16 kW at MT, 0.16 kW at HT. Use the Benchmark tool to evaluate capacity at your exact SST/SDT and superheat conditions.
Is the MYCOM i125L-H a screw (single-stage booster)?
Yes — the MYCOM i125L-H is classified as a screw (single-stage booster) in the DigiEntropy taxonomy. Browse other screw (single-stage booster)s from MYCOM on the brand page.
Can the MYCOM i125L-H be retrofit to a lower-GWP refrigerant under EU F-Gas Regulation 2024/573?
Open the F-Gas Retrofit tool with this model pre-selected to see drop-in alternatives ranked by capacity match, COP, GWP, PFAS impact, and 2026/2030/2035 phase-out timeline.
What polynomial standard is the MYCOM i125L-H performance data based on?
Capacity, power, and current polynomials follow EN 12900 (10-coefficient bivariate in SST/SDT) for European-origin brands and AHRI 540 for North American brands. Coefficients are normalized into a common form for cross-brand comparison. Fit your own data in the Polynomial Fitter tool.
Find equivalents · F-Gas retrofit path · Open in Benchmark · All MYCOM models