Palladio KS1NH0480NDIC

Semi-Hermetic Screw

Specifications

  • Compression technology: Screw
  • Configuration: Single
  • Enclosure / drive: Semi-Hermetic
  • Variable speed: Not Stated
  • Hazardous-area certification: Not Stated
  • Product category: compressor

Qualified refrigerants & capacity

Capacity (kW) evaluated at standard conditions: ULT (-60/45 °C), LT (-35/45 °C), MT (-10/45 °C), HT (-5/45 °C).

RefrigerantULTLTMTHT
R1234ze(E)—0.020.110.15

Related Palladio models

Frequently asked questions

What refrigerants does the Palladio KS1NH0480NDIC support?

The Palladio KS1NH0480NDIC is qualified for R1234ze(E). Capacity values at standard ULT (-60/45 °C), LT (-35/45 °C), MT (-10/45 °C) and HT (-5/45 °C) conditions are listed in the table above for each refrigerant.

What is the cooling capacity of the Palladio KS1NH0480NDIC?

Running on R1234ze(E), the Palladio KS1NH0480NDIC delivers 0.02 kW at LT, 0.11 kW at MT, 0.15 kW at HT. Use the Benchmark tool to evaluate capacity at your exact SST/SDT and superheat conditions.

Is the Palladio KS1NH0480NDIC a semi-hermetic screw?

Yes — the Palladio KS1NH0480NDIC is classified as a semi-hermetic screw in the DigiEntropy taxonomy. Browse other semi-hermetic screws from Palladio on the brand page.

Can the Palladio KS1NH0480NDIC be retrofit to a lower-GWP refrigerant under EU F-Gas Regulation 2024/573?

Open the F-Gas Retrofit tool with this model pre-selected to see drop-in alternatives ranked by capacity match, COP, GWP, PFAS impact, and 2026/2030/2035 phase-out timeline.

What polynomial standard is the Palladio KS1NH0480NDIC performance data based on?

Capacity, power, and current polynomials follow EN 12900 (10-coefficient bivariate in SST/SDT) for European-origin brands and AHRI 540 for North American brands. Coefficients are normalized into a common form for cross-brand comparison. Fit your own data in the Polynomial Fitter tool.

Find equivalents · F-Gas retrofit path · Open in Benchmark · All Palladio models